cat.8100v cs series miniature sized, high ripple current, long life high ripple current and long life product withstanding load life of 8000 to 10000 hours at +105?. suited for ballast application. adapted to the rohs directive (2002/95/ec). aluminum electrolytic capacitors u 1 c 2 s 3 2 4 e 5 1 6 0 7 1 8 m 91011 capacitance tolerance (20%) rated capacitance (100f) rated voltage (250v) h d 12 t size code series name type f d p 10 5.0 12.5 5.0 16 7.5 18 7.5 f d 0.6 0.6 0.8 0.8 l + 1.5max. 15 min 4 min radial lead type sleeve (p.e.t.) f d pressure relief vent type numbering system (example : 250v 100f) configuration f d + 0.5max. p 0.5 f d 10 pb-free leadwire pb-free pet sleeve pd 12.5 ~ 18 hd configuration (mm) dimension table in next page. please refer to page 21, 22, 23 about the formed or taped product spec. please refer to page 3 for the minimum order quantity. specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tan stability at low temperature endurance shelf life marking performance characteristics item 40 ~ +105? (160 ~ 400v) , 25 ~ +105? (450v) 160 ~ 450v 6.8 ~ 330? 20% at 120hz, 20? after 1 minutes' application of rated voltage, leakage current is not more than 0.04cv+100 (?) printed with white color letter on dark brown sleeve. after storing the capacitors under no load at 105?c for 1000 hours, and after performing voltage treatment based on jis c 5101-4 clause 4.1 at 20?, they will meet the specified value for endurance characteristics listed above. measurement frequency : 120hz capacitance change leakage current after an application of d.c. bias voltage plus the rated ripple current for 10000 hours (8000 hours for d =10) at 105? the peak voltage shall not exceed the rated d.c. voltage, capacitors meet the characteristic requirements listed at right. tan within ?0% of initial value initial specified value or less 200% or less of initial specified value z 25? / z+20? z 40? / z+20? rated voltage (v) impedance ratio zt / z20 (max.) 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 450 6 -- measurement frequency : 120hz, temperature : 20? rated voltage (v) tan (max.) 160 0.20 200 0.20 250 0.20 400 0.24 450 0.24 350 0.24 cs ca smaller ? please refer to page 21 about the end seal configulation.
cat.8100v cs series aluminum electrolytic capacitors v 10 16 10 20 10 20 10 20 12.5 20 12.5 20 12.5 25 16 20 16 20 16 25 18 31.5 320 500 650 750 1180 1275 1420 1420 1890 2370 3130 10 16 10 20 10 20 12.5 20 12.5 20 16 20 16 20 16 25 18 25 18 35.5 320 500 650 980 1300 1380 1420 1890 2365 3220 10 20 10 20 12.5 20 12.5 20 16 20 16 20 16 25 18 25 18 31.5 350 500 800 980 1300 1380 1530 1940 3130 10 16 10 20 12.5 20 16 20 16 20 16 25 18 20 18 25 18 25 280 350 650 900 1080 1400 1375 1530 1575 10 16 10 20 12.5 20 12.5 20 16 20 16 25 18 20 18 25 18 25 280 350 550 760 900 1180 1180 1470 1525 10 20 12.5 20 12.5 25 16 20 16 25 18 20 18 25 18 31.5 280 450 600 730 980 980 1200 1575 2c 2d 2e 2v 2g 2w 160 200 250 350 400 450 case size f d l (mm) : rated ripple (marms) at 105?c 100khz : in this case, 6 will be put at 12th digit of type numbering system. frequency coefficient 50hz 0.40 120hz 0.50 1khz 0.80 10khz 0.90 100khz ~ 1.00 dimensions frequency coefficient of rated ripple current cap code 6.8 10 15 22 33 47 68 82 100 150 220 330 6r8 100 150 220 330 470 680 820 101 151 221 331
|
